Wi-Fi Protected Setup (Wps); Using Wps To Connect To A Network - Epson WF-7110DTW User Manual

11. Press the
You see either the
directly to your product from your computer or device.
Note: If the
mode is not enabled. Repeat these steps to try again.
Parent topic: Wi-Fi Direct Mode Setup
Related tasks
Entering Characters on the LCD Screen

Wi-Fi Protected Setup (WPS)

If your network uses a WPS-enabled wireless router or access point, you can quickly connect your
product to the network using Wi-Fi Protected Setup (WPS).
Note: To check if your router is WPS-enabled, look for a button labeled WPS on your router or access
point. If there is no hardware button, there may be a virtual WPS button in the software for the device.
Check your network product documentation for details.

Using WPS to Connect to a Network

Parent topic: Wi-Fi or Wired Networking
Using WPS to Connect to a Network
If you have a WPS-enabled wireless router or access point, you can use Wi-Fi Protected Setup (WPS) to
connect your product to the network.
1. Press the down arrow button, select Wi-Fi Setup, and press the OK button.
Back button to return to the Home screen.
or connection symbol on the LCD screen and should be able to print
or connection symbol is not displayed on the LCD screen, Wi-Fi Direct
30