Power Cleaning Using A Computer Utility - Epson ET-2850 User Manual

1. Make sure there are no errors on the LCD screen and the output tray is extended.
2. Visually check the ink levels and make sure each ink tank is at least one-third full.
Caution: If you run a Power Cleaning when the ink levels are low, you may damage the product.
3. Press the
4. Select Maintenance > Power Cleaning.
5. Follow the instructions on the LCD screen to run the Power Cleaning.
A confirmation is displayed when Power Cleaning is complete.
6. When the Power Cleaning is finished, run a nozzle check.
If the print quality did not improve, turn off the product and wait at least 12 hours before running another
nozzle check. Run Print Head Cleaning or Power Cleaning depending on the printed pattern.
If the print quality does not improve after running the Power Cleaning utility multiple times, contact Epson
for support.
Parent topic:
Related concepts
Print Head Cleaning
Print Head Nozzle Check
Related references
Where to Get Help
Related topics
Loading Paper

Power Cleaning Using a Computer Utility

You can run a Power Cleaning using a utility on your Windows or Mac computer.
Note: After running a Power Cleaning, you must turn off the product and wait at least 12 hours before
running another Power Cleaning.
1. Make sure there are no errors on the LCD screen and the output tray is extended.
2. Load a few sheets of plain paper in the product.
home button, if necessary.
Power Cleaning
173