Table of Contents
Advertisement
RadioPro IP Gateway
Installation and Configuration Guide NEXEDGE NX-57xx/58xx
1.
Connect and read the control station as any other radio
Using a Kenwood programming cable, connect the NX-5700/5800 Control Station radio to a PC or
Notebook that has the correct Kenwood FPU version (KPG-D1N in this case).
Open the KPG-D1N FPU.
Ensure that the correct COM port is selected.
Model
Product Information
Read Configuration
From the
tab, choose the
page, and then click the
button as shown below.
Enable
Feature Selections
that this radio is licensed for with a check mark in the appropriate boxes,
and then click the
OK
button.
7
Advertisement
Table of Contents
