RadioPro IP Gateway
3.1.2 Configure the Data Revert Radio
If you are using a Data Revert radio, follow the same steps for configuring the radio as you would for the Voice Radio
with the following exceptions:
•
Because the Data Revert Radio does not deal with audio, you may skip the steps for
Options
•
Be certain to follow steps described on page 10,
•
Because Channel Steering only affects the Voice Radio, program only the data channel into the radio.
Installation and Configuration Guide NEXEDGE NX-57xx/58xx
on page 12, as well as steps for
Kenwood FPU
Configure Audio Routing Options
Configure GPS
14
Configure Sound
on page 13.
Settings.