LifeGear 63144 Owner's Manual page 27

STEP 8-1
A. Thread the Cable (32) through the Top Frame (12). Slot the Pulley (46) into the Top
Frame (12) and pull the Cable (32) through over the Pulley (46). Then secure the Pulley
(46) into the Top Frame (12) with one Hexagon Head Bolt (75) and one Nylon Nut (85).
Tighten bolt and nylon nut with one 14 mm-17 mm Double Open End Wrench and one
17 mm-19 mm Double Open End Wrench provided.
B. Pull the Cable (32) forwards through the Top Frame (12). Slot the Pulley (46) into the
Top Frame (12) and pull the Cable (32) through over the Pulley (46). Then secure the
Pulley (46) into the Top Frame (12) with one Hexagon Head Bolt (75) and one Nylon Nut
(85). Tighten bolt and nylon nut with one 14 mm-17 mm Double Open End Wrench and
one 17 mm-19 mm Double Open End Wrench provided.
C. Pull the Cable (32) downwards through over the Pulley (46) in the Pivot Frame (13).
D. Pull the Cable (32) upwards through the Upright Tube (6). Slot the Pulley (46) into the
Upright Tube (6) and pull the Cable (32) through over the Pulley (46). Then secure the
Pulley (46) into the Upright Tube (6) with one Hexagon Head Bolt (75) and one Nylon Nut
(85). Tighten bolt and nylon nut with one 14 mm-17 mm Double Open End Wrench and
one 17 mm-19 mm Double Open End Wrench provided.
14 mm-17 mm
26
17 mm-19 mm
14 mm-17 mm
17 mm-19 mm