LifeGear 63144 Owner's Manual page 15

STEP 3
Slide the Bottom Weight Stack Cover Support (9) and two Rubber Bumpers (44) onto both
Weight Guides (5).
Attach the Bottom Weight Stack Cover Support (9) onto the Rear Base Tube (1) with two
Hexagon Head Bolts (81) and two Flat Washers (88). Tighten bolt with a 14 mm-17 mm
Double Open End Wrench provided.
Hardware:
(81) Hexagon Head Bolt
(88) Flat Washer
14
14 mm-17 mm
2 PCS
2 PCS