Advertisement
Quick Links
Advertisement
Related Manuals for Laserworld CS-200RGY
Summary of Contents for Laserworld CS-200RGY
- Page 1 CS-200RGY USER MANUAL Please read this manual carefully before use!
- Page 2 USER MANUAL: Laserworld CS-200RGY Page 2 of 11 Checking Parts Please check if the following parts are included: 1 x CS-200RGY Laser 1 x Power cable 1 x DMX cable 1 x Interlock plug 1 x User manual Date: 01/2008...
- Page 3 USER MANUAL: Laserworld CS-200RGY Page 3 of 11 DANGER LASER RADIATION! Avoid direct eye exposure! Laser radiation can cause eye damage and/or skin damage All protective measures for a safe operation of this laser must be applied. 1. SAFETY INSTRUCTIONS If the device has been exposed to drastic temperature fluctuation, do not switch it on immediately.
- Page 4 USER MANUAL: Laserworld CS-200RGY Page 4 of 11 2. OPERATING DETERMINATIONS 6. The operator has to make sure that laser radiation – also reflected laser radiation –higher than the highest allowed level is avoided by technical or organisational measures. 7. Make sure that the used voltage is : AC 220V~240V, 50/60Hz 8.
-
Page 5: Specification
USER MANUAL: Laserworld CS-200RGY Page 5 of 11 Thank you for purchasing our CS-200RGY laser projector. In order to use this product safely and throughtly. Please read over this manual carefully before any operation,the operation must according to manual strictly to avoid any personal hurt or products damage . -
Page 6: Warning & Safety
USER MANUAL: Laserworld CS-200RGY Page 6 of 11 11. Maintenance should be performed every 15-day period, by using a sponge which is dipped with alcohol, rather than wet cloth or other chemical liquid, to clean the mirror. WARNING & SAFETY Class IIIblaser products Power output from 5 milliwatts to 500 milliwatts. - Page 7 USER MANUAL: Laserworld CS-200RGY Page 7 of 11 1: ON/OFF(Power input with inner fuse) 2: REMOTE---------Interlock (pin 1,2), connect to emergeny switch, or use interlock plug 3: DIP switches, reference to DMX Control Mode as below. 4: DMX IN/OUT 5: AUDIO-------- Tune the sensitivity of sound activation(H),MAX→high sensitivity;...
- Page 8 USER MANUAL: Laserworld CS-200RGY Page 8 of 11 DMX Channel Instruction----------12CHS single/three color Please refer to appendix1 D. ILDA Mode This laser projector has designed with a ILDA automatic switching feature.ILDA mode will be active when the pin-25 female(on the rear panel) was be connected.
- Page 9 USER MANUAL: Laserworld CS-200RGY Page 9 of 11 ILDA-standard connector 25/26-pin 1 X+ Scanneroutput + 2 Y+ Scanneroutput + 3 Intens+ Intensity/Blanking + 4 Interlock A Internally connected to 17 5 Red + Coloroutput Red + 6 Green + Coloroutput Green + 7 Blue + Coloroutput Blue + 8 –...
- Page 10 Laserworld cannot be made liable for damages caused by incorrect installations and unskilled operation!
- Page 11 After installing the device, an inspection and official approval is indispensable for the overall setup. The inspection must follow the european guidelines EN 60825-1 and corresponding regulations for the prevention of accidents BGV-B2. This declaration is executed on behalf of the CS-200RGY Laser manufacturer. Laserworld (Switzerland) AG Oberstrasse 1 8274 Tägerwilen...