User manual: CS-400G page2 of 6 Checking parts Please check if all listed parts are included, and are not damaged. 1 x CS-400G laser 1 x power cable 1 x remote connector 2 x key 1 x manual SAFETY INSTRUCTIONS If the device has been exposed to great temperature changes, do not switch it on immediately.
User manual: CS-400G page3 of 6 Operating temperature is 10~35° C . Let laser cool off 10minutes after 2 hours of operation, to ensure maximum lifetime for the diode. Distance between laser aperture and projection screen should be not less than 1 meter.
User manual: CS-400G page4 of 6 DMX mode CHANNEL VALUE 0~255 CONTROL CONTENT 0~30 Laser source turn off geometric pattern 31~61 DMX geometric pattern model page 62~92 DMX geometric SHOW editing model 93~123 DMX geometric SHOW automatic model 124~154 DMX geometric SHOW music control model...
After installing the device, an inspection and official approval is indispensable for the overall setup. The inspection must follow the european guidelines EN 60825-1 and corresponding regulations for the prevention of accidents BGV-B2. This declaration is executed on behalf of the Laserworld CS-400G manufacture Laserworld (Switzerland) AG Oberstrasse 1 8274 Tägerwilen...