Advertisement
USER MANUAL: Laserworld CS-200RGY
EU- Declaration of Conformity
We hereby confirm that the following device
Laserworld CS-200RGY
complies with the essential safety requirements, laid down in the regulations of the
committee to assimilate the provisions of law of all participating EU states on the
electromagnetic compatibility (98/336/EWG).
The device has been classified considering the following EU-norms on
electromagnetic compatibility:
DIN EN 55103-1: 1996
DIN EN 55103-2: 1996
DIN EN 61000-3-2:2000 + A2: 2005
DIN EN 61000-3-3:1995 + A1: 2001
Assessment of compliance of the product with the requirements relating to the Low
Voltage Directive (LVD) was based on the following standards:
DIN EN 60065 : 2002
Furthermore, the device is verified in correspondence to the laser class regulations
DIN EN 60825-1, if properly set up according to the upper mentioned laser safety
regulation.
After installing the device, an inspection and official approval is indispensable for the
overall setup. The inspection must follow the european guidelines EN 60825-1 and
corresponding regulations for the prevention of accidents BGV-B2.
This declaration is executed on behalf of the CS-200RGY Laser manufacturer.
Laserworld (Switzerland) AG
Oberstrasse 1
8274 Tägerwilen
SWITZERLAND
Authorized person:
Supervisory board Ms Rhea Gössel
place of business: 8274 Tägerwilen / SWITZERLAND
company number: CH-440.3.020.548-6
Commercial Registry Kanton Thurgau
www.laserworld.com
info@laserworld.com
representative according to EMVG:
Cleantech Europe GmbH
Managing Director: Thomas Schulze
Fürkhofstr. 5
81927 München / DE
Page 11 of 11
Date: 01/2008
Advertisement
