Advertisement
USER MANUAL: Laserworld CS-200RGY
1: ON/OFF(Power input with inner fuse)
2: REMOTE---------Interlock (pin 1,2), connect to emergeny switch, or use interlock
plug
3: DIP switches, reference to DMX Control Mode as below.
4: DMX IN/OUT
5: AUDIO-------- Tune the sensitivity of sound activation(H),MAX→high sensitivity;
MIN→low sensitivity.
6: MIC(microphone).-------- To receive sound activated signal
7: LASER--------Turn lasers ON or OFF.
8: ILDA--------DB-25 Female
Operation Mode Instruction:
A. Sound Active
Reference to DIP switch as below to choose this mode.
B. Auto
Includes Auto mode-Auto and Auto mode-Animal,reference to DIP switch as below.
C. DMX Control Mode
The first part is DIP address code reference,follow this to choose the mode you
need.
DIP switch:
Address 1-10 Pin,(1:ON,0:OFF,x:ON or OFF)
1 ~
10
0,0,0,0,0,0,0,0,0,0
1,0,0,0,0,0,0,0,0,0
1,1,0,0,0,0,0,0,0,0
0,0,1,0,0,0,0,0,0,0
x,x,x,x,x,x,x,x,x,1
Address code Calculate,When the mode is DMX control:
x
x
x
1
2
4
when address is 1000 0000 01
this mean is 1 x 1=1, the same you must select DMXchannel 1 as the Start channel,
DMXchannel 25 as the End channel
when address is 0100 1000 01
this mean is 1 x 2 + 1 x 16=18, the same as above,select DMXchannel 18 as the
Start channel, DMXchannel 42 as the End channel.
x
x
x
8
16
32
Auto mode-Sound
Auto mode-Auto
Auto mode-Animal
Slave
DMX control
x
x
x
64
128
512
Page 7 of 11
Mode
1
DMX control
Date: 01/2008
Advertisement
