Advertisement
USER MANUAL: Laserworld CS-200RGY
Thank you for purchasing our CS-200RGY laser projector. In order to use this
product safely and throughtly. Please read over this manual carefully before any
operation,the operation must according to manual strictly to avoid any personal hurt
or products damage . Any problem exclude in this manual please contact us!.
Specification
Model Reference#
Components
Using voltage
Voltage of input signal
Control Mode
DMX channel
Scanning system
Lasers&Power
Operating temperature
Dimension(mm)
Weight(kg)
Safety fuse
ATTENTION&MAINTENANCE
1. Do not disconnect the device without professional instruction
2.
Keep surrounding dry and clean.
the rain or dank and dusty environment. Projector should be covered with
water-proof when operate at outside.
3. Keep surrounding temperature at15~30 ,Remain 10minutes for equipment
cooling after 2 hours continuously work, or laser expected time will be
reduced.
4. Distance between lasing aperture and projected item should not be less than 1
meter.
5. Do not turn device on/off frequently to avoid broken.
6. Do not look into the laser beam directly, or view laser beam directly with
optical instruments.
7. Do not touch the device with wet hands.
8. Turn off the power before installation and maintenance.
9. When the laser diode became dim or broken, please contact the dealer timely.
10.
To use the original package when transport again and to avoid shake.
LP-209
Laser projector×1
Power cable×1
DMX512 cable×1
Interlock 9pin plug×1
Laser key×2
AC 110V~230V，50/60Hz
-10V ~ +10V
Auto/AUDIO/DMX/ILDA(optional)
12
20KPPS
Green laser : 532nm/ 35~50mW
Red laser : 650nm/140-150mW
10° ~ 40°
280(L)×200(W)×150(H)
3
250V / F2A Φ5×20mm
This unit should be keep dry, do not use in
Page 5 of 11
Date: 01/2008
Advertisement
