Advertisement
Liquid Soap Dispensing
1. Dispense the liquid soap from the soap container
as needed by pressing your elbow against the
operating lever and hold the other hand under the
dispensing head.
Information:
With the first time operation, press the operating
lever several times to the stop until the soap
dispenser starts dispensing. Hold your hand under
the dispensing head.
Cleaning and Disinfecting of Housing and Dosing Pump
ATTENTION!
For cleaning, never use any scrubbing not acute cleaning agents,
neither cleaning agents that contain chlorine, as they may damage the
surface.
1. Regularly perform disinfecting cleaning by wiping external surfaces of the soap
dispenser.
2. Before each refilling of the soap dispenser thoroughly clean it manually.
3. Remove the soap container from the housing.
4. Wash the housing, dispensing head, dispensing pump with tube thoroughly
under hot running water.
5. Dry all cleaned surfaces thoroughly.
6. Finally, place the housing with the dosing pump onto the wall holder.
850049
EN
7 / 8
Advertisement
