Advertisement
Wall Mounting
1. Fix the soap dispenser in a required location.
2. Observe the following information during installation:
– space required above the disinfectant dispenser: 40 mm
– recommended installation height: 130–135 cm, measured from the floor
to the upper edge of the liquid dispenser.
3. Unlock the lock with the enclosed key.
4. Pull the front liquid dispenser cover down.
5. Slightly lift the soap container and remove it from the soap dispenser.
6. Press the locking button from the inside and pull the wall holder down from the
housing.
Fig. 2
7. Using the openings in the wall
holder mark 3 spots to make holes
and bore them in the wall.
8. Insert studs into the bored holes.
Mount the wall holder with bolts.
850049
Fig. 3
9. Finally, slide the soap dispenser
housing onto the wall holder until
the locking button clicks.
EN
5 / 8
Advertisement
