Scheduled Maintenance Inspections; Labels - A; Electrical; Hydraulic - Skyjack SJ519 TH Service Manual

Telehandlers

Hide thumbs Also See for SJ519 TH:

Operating manual (100 pages)

Table Of Contents

100

101

102

103

104

105

106

107

108

Table of Contents

Section 1 – Scheduled Maintenance

1.5 Scheduled Maintenance

Inspections

Before performing the visual and daily maintenance

inspections, ensure that the telehandler is parked on a

firm level surface.

Begin the visual and daily maintenance inspections

by checking each item in sequence for the conditions

listed in this section.

WARNING

To avoid injury, do not operate a telehandler until

all malfunctions have been corrected.

WARNING

To avoid possible injury, ensure telehandler power

is off during your visual and daily maintenance

inspections.

NOTE

While performing visual and daily inspections

in different areas, be aware to also inspect all

switches, electrical and hydraulic components.

1.5-1 Labels -

Refer to the labels section of the operating manual

and determine that all labels are in place and are

legible.

216942AC

Fork Tilt

Cylinder

1.5-2 Electrical

Maintaining the electrical components is essential to

good performance and service life of the telehandler.

Ensure proper operation of all gauges.

Inspect the following areas for chafed, corroded and

loose wires:

Ensure electrical devices are properly secured with no

visible damage. Ensure there are no loose or missing

parts.

1.5-3 Hydraulic

Maintaining the hydraulic components is essential to

good performance and service life of the telehandler

Perform a visual inspection and check for leaks

around the following areas:

1.5-4 Cylinders -

Ensure all cylinders are properly secured and there is

no evidence of leakage.

Grease weekly and check pins and bushings to

ensure there is no evidence of damage.