Omron SYSMAC CXONE-ALC-EV2 Series Operation Manual page 38

Creating New Drive Files
Item
Dialog
box
Inverter • Slave Unit Address: 1 to 32 (Modbus-RTU slave
address) (See note 1.)
• Communications Timeout: 500 to 5,000 ms
• Number of retries: 1 to 6
Servo • Slave Unit Address: 0 to F (Servo Drive commu-
nications Unit No.) (See note 2.)
• Communications Timeout: 500 to 5,000 ms
• Number of retries: 1 to 6
Item
Dialog
box
Inverter • Slave Unit Address: 1 to 32 (Modbus-RTU slave
address) (See note 1.)
• Master Unit Address: 0 to 15 (Unit address for
Serial Communications Unit).
Or select CS-Series Inner Board Option (Serial
Communications Board).
• Port Selection: Port 1 or Port 2
Servo • Slave Unit Address: 0 to F (Servo Communica-
tions Unit No.) (See note 2.)
• Master Unit Address: 0 to 15 (Unit Address for
Serial Communications Unit).
Or select CS-Series Inner Board Option (Serial
Communications Board).
• Port Selection: Port 1 or Port 2
Network Settings
Click the Settings... Button to the right of the Connection Type Field.
The following dialog box will be displayed.
Detailed Settings for Direct Connections
Network Tab Page
Via PLC (SCU/SCB) Connections (Except R88D-WN)
Network Tab Page
Drive Tab Page
• Port Selection: COM1, COM2, etc.
• Baud Rate: 2400, 9600, 19200, or 38400 bits/s
• Parity: None, Odd, or Even
• Data bits: 7 or 8
• Stop bits: 1 or 2
• Port Selection: COM1, COM2, etc.
• Baud Rate: 9600 or 19200 bits/s
• Parity: None, Odd, or Even
• Data bits: 7 or 8
• Stop bits: 1 or 2
Gateway PLC Tab Page
Click the Properties Button to set the PLC (with a
Serial Communications Unit/Board) to use as the
gateway.
Section 2-2
21