Omron SYSMAC CXONE-ALC-EV2 Series Operation Manual page 34

Creating New Drive Files
2-2-2 Method 2: Creating a New Data File without a Connected Drive
Drive Name
Drive Type
Select File - New . The following New Drive Dialog Box will be displayed.
Any name may be input for the drive name. The default name is "Drive" plus a
sequential number.
Drive Type Selection
Select Inverter or Servo .
Drive Type Name
For an Inverter, select one of the following series from the pull-down list.
• 3G3JV
• 3G3MV
• 3G3RV (See note.)
Note For version 1 of the 3G3RV, select 3G3RV , click the Settings But-
ton and select -V1 from the Specification pull-down list.
For a Servo, select one of the following series from the pull-down list.
• R7D-AP: SMARTSTEP A Series
• R88D-WN: MECHATROLINK-II W Series
• R88D-WT: W Series
Detailed Drive Settings
Click the Settings... Button to open the Detail Setting Dialog Box.
Section 2-2
17