Table of Contents
Advertisement
Do not directly apply water to fan motors or any other electrical components in the cabinet.
Always be careful to minimize moisture on and near the electrical components. Cleaning of
electrical components must be done by Qualified Maintenance Technician.
When working inside the cabinet takes care not to damage any components such as fan blades
or probes and ensure no strain is put on any cables.
Once a final check has been carried out to ensure the display cabinet is fully assembled the
electrical isolator should be unlocked and turned on. The cabinet will start to operate again.
The alarms can then be re‐activated, double check that alarms are operational before
allowing the display to be re-merchandised.
Advertisement
Table of Contents
Need help?
Do you have a question about the EXPRESS EX125C and is the answer not in the manual?