Page 2
Dear customer Please be sure to read this operating manual carefully before putting your new refrigerated cabinet into use. The manual contains important notes on safety and proper installation, use and maintenance of the plug-in refrigerated cabinets. Please keep the manual ready for reference and hand it over to any future new owner of the cabinets. Make sure the manual is read by all staff who may work with the merchandiser and that they understand and observe the contents.
Contents Section Title Page 1 Proper use 2 Safety regulations 3 Installation 3.1 Selecting the place of installation 3.2 Installation possibilities 3.3 Installation procedure 3.4 Requirements for electrical connection 4 Starting 4.1 Measures prior to starting 4.2 Setting into operation 5 Setting the storage temperature 6 Defrosting instruction 7 Cleaning...
1 Proper use The island site cabinets SUPER as described in this operating manual are particularly intended for storing frozen foods and refrigerant foods. Do not load the refrigerated cabinet with non refrigerated products or use it to cool products. Proper use only means the use as described above, adhering to the specifications on installation, connection, operation and service.
Page 5
Only for R600a and R290 refrigerant cabinet This Refrigerator containd R600a or R290 flammable refrigerant. Keep clear of obstruction all ventilation • openings in the appliance enclosure or in the structure for building-in (IEC/EN 60335-2-89:2002) Do not use mechanical devices or other means to accelerate the defrosting process, other than those •...
3. Installation 3.1 Selecting the place of installation In selecting the place of installation, ensure that the follow- ing instructions are observed, this being vital for proper and trouble free working of the cabinet: Do not install the cabinet out-doors. Do not install the cabinet in the vicinity of heating radia- tors or other heat sources.
3.2 Installation possibilities Installation options are: Stand-alone installation against a wall or in a corner (fig. 4) Single-row line-up installation against a wall (fig.5) Back-to-back installation (fig. 6) In all installation options, air exits must be unhindered to exclude accumulation of heat. Stand-alone: When the cases is installed as stand-alone unit against a wall (see fig 4) a min.
3.3 Installation procedure The cabinet should best be sited whilst still packed to avoid damages. If the refrigerated cabinet cannot be sited whilst still packed because of narrow doors the packaging and transport base should be removed beforehand. Remove packaging and transport guards.
3.4 Requirements for electrical connection The cabinet is connected by inserting the power plug in a socket (fig. 8). The cabinet must not be plugged into a multiple outlet power strip (see fig.9) The cabinet has no ON/ OFF switch, which is why we recommend provision of a remote load-break switch.
5 Setting the storage temperature The electronic controller is designed for the control of refrigeration and freezer units. The temperature inside of cases is controlled automatically by electronic (see fig. 13) Start the cabinet only if it has been installed as described.
These models automatically defrosts 3 times a week, at night time. 7 Cleaning Turn of power supply to the unit by switching off before cleaning. Do not use any aggressive or abrasive cleaning agents. Never use a water hose or a high-pressure jet to clean the case.
9 Troubleshouting Any trouble occurring might be due to a minor problem that you can correct yourself following the instructions be- low. Do not try any further action if the pointers given cannot solve the problem! Repairs on the cabinet must be made only by qualified specialists. Incompetent repair work can constitute a serious risk to you, your staff and customers, contact Dealer for any repairs needed.
Need help?
Do you have a question about the SUPER-B 45 and is the answer not in the manual?
Questions and answers