Turning The Unit On/Off - Calibration Process - IK UNO Synth Pro User Manual

UNO Synth Pro
2 – Turning The Unit On/Off - Calibration Process
UNO Synth Pro powers on as soon as the power supply is connected to the unit. The unit can then be powered
on and off by pressing and holding the HOLD Button.
Once powered ON it automatically starts the first tuning and capacitance sensing calibration. During the
calibration the display will first show a static "UNO," the FW version and then a blinking "CALIBRATION."
FW V 1.0.0
CALIBRATION
The unit will then be ready for use and the last used preset will be loaded and indicated on the display.
Do not press buttons or put objects on the unit during the calibration as this will incorrectly calibrate the
capacitance sensing system. In case of incorrect calibration of the capacitance sensing system, please power
off the unit, and then turn it on again to repeat the process.
Various noises and calibration sounds might be audible during the startup of the unit, so we recommend turning
your system volume down while starting up.
7
2 – Turning The Unit On/Off - Calibration Process