Modulation Matrix (Matrix) - IK UNO Synth Pro User Manual

UNO Synth Pro
4.2.6 – Modulation Matrix (MATRIX)
The Modulation Matrix is the way to create modulation connections between parts of the engine, which are
usually not connected (ex: the amp envelope modulating the OSC2 wave).
There are 16 modulation slots available, each with a source, destination and amount. Modulation amounts can
have unipolar or bipolar values depending on the destination. For bipolar destinations, negative values create
inverted modulations.
The Modulation Matrix is accessed by pressing the MATRIX button, which lights the 8th row of text indicators.
MOD N*: Selects the modulation slot number between 1 and 16. Unlike the other parameters, the display here
will show not only the slot number, but also the source and the destination.
MOD 1
VELOCITY
AMP ENV
SOURCE: Selects from the available modulation sources.
DEST: Selects from the available modulation destinations.
AMOUNT: Adjusts the bipolar amount of modulation, depending on the destination and source parameters.
CV and Gate connections are defined in the Modulation Matrix by selecting them as destinations for the CV/
Gate outputs) or sources for the CV/Gate inputs.
The shortcut for the MATRIX row is available by holding the MATRIX button and pressing a 1-16 button to select
the modulation slot number.
19
4 – Front Panel Interface