Envelopes (Filter Env - Amp Env) - IK UNO Synth Pro User Manual

UNO Synth Pro
4.2.5 – Envelopes (FILTER ENV - AMP ENV)
There are two ADSR envelopes, the Filter Envelope and the Amp Envelope. The Filter Envelope modulates the
cutoff frequency of the two filters with the modulation amount set by the Envelope Amount controls for each
filter. The Amp Envelope modulates the volume of the VCA by 100%.
The envelopes can also be used as sources to modulate other parts of the synth in the Modulation Matrix.
FILTER ENVELOPE
To access the Filter envelope, press the FILTER ENV button, which lights the 6th row of the text indicators.
ATTACK: Sets the amount of time from 0 to its maximum. The range is from 0 to 30 sec.
DECAY: Sets the amount of time needed to go from peak to the specified sustain level.
The range is 0.1ms to 30 sec.
SUSTAIN: Sets the level of the held note. Unlike A, D and R, Sustain is a level and not a time control. The range
is from 0 to 127.
RELEASE: Sets the amount of time for the sustain level to 0. The range is 0.1ms to 30 sec.
AMP ENVELOPE
To access the AMP envelope, press the AMP ENV button, which lights the 7th row of the text indicators.
ATTACK: Sets the amount of time from 0 to its maximum. The range is 0.1ms to 30 sec.
DECAY: Sets the amount of time needed to go from peak from the specified sustain level.
The range is 0.1ms to 30 sec.
SUSTAIN: Sets the level of the held note. Unlike A, D and R, Sustain is a level and not a time control. The range
17
4 – Front Panel Interface