Arpeggiator - IK UNO Synth Pro User Manual

UNO Synth Pro
5.4 – Arpeggiator
UNO Synth Pro is equipped with a multimode arpeggiator with 10 modes, a 4-octave range and hold
functionality.
The modes are:
UP: Held notes play from the lowest to the highest (default).
DOWN: Held notes play from the highest to the lowest.
U/D: Held notes play from the lowest to the highest then down to the lowest again.
UD+: A variation of U/D (up/down) where the upper note and the lower note play twice at the top and bottom of
the pattern instead of just playing once.
D/U: Held notes play from the highest to the lowest then up to the highest again.
DU+: A variation of D/U (down/up) where the lower note and the upper note play twice at the bottom and top of
the pattern instead of just playing once.
RND: Held notes play in a random order.
PLY: (as played) The held notes played in the order in which they are triggered.
X2U: Each note in the arpeggio plays twice from the lowest to the highest.
X2D: Each note in the arpeggio plays twice from the highest to the lowest.
Selecting the arpeggiator mode
To select the arpeggiator mode press the ALT button, then Press DIRECTION. Use DATA to select between the
modes.
Selecting the arpeggiator gate
To select the arpeggiator mode press the ALT button, then Press GATE. Use DATA to select between 0 and 10,
where 10 is a legato note.
Adjusting the swing
To select the arpeggiator mode press the ALT button, then Press SWING. Use DATA to select between 50% and
80%.
Note that the Swing is global parameter for both ARP and sequencer.
Selecting the arpeggiator triggers
The arpeggiator is constantly repeating the played notes in loop, and while this happens the
16 steps light up following the arpeggio notes.
Pressing the steps, you can select when the notes from the arpeggio will be played, creating different rhythmic
patterns.
30
5 – Global Controls