Voice Mode: Assign System - IK UNO Synth Pro User Manual

UNO Synth Pro
5.6 – Voice Mode: Assign System
The voice assign system is responsible for the allocation of the voices composing the analog engine, and
change behavior based on the VOICE MODE selected.
Using the VOICE button, the screen will show the selection and the relative options to customize the selected
mode.
The voice mode is a parameter saved in a preset.
LEGATO: When LEGATO mode is enabled, and detached notes are played, each Attack will still be re-triggered,
but when overlapping notes are played, the pitches will change without new Attacks, for Legato response. This
is the standard and default mode of the synthesizer.
MONO: The MONO mode is selected by pressing the "VOICE" button until the display shows "MONO".
PARAPHONIC: In this mode the 3 Oscillators will play up to 3 different notes (or pitches) played on the
keyboard. This is possible as the 3 oscillators pitch can be controlled separately in a one voice synth
architecture.
Please note that each oscillator can still have different settings, so if you want a "poly" sound remember to set
the oscillators accordingly.
35
5 – Global Controls