Installation And Setup - IK UNO Synth Pro User Manual

UNO Synth Pro
1 – Installation and Setup
2
DESKTOP
VERSION ONLY
Please note: To prevent malfunction and equipment failure, always turn down the volume and turn off all the
units before making any connections.
UNO Synth Pro Desktop is USB powered and includes two USB micro ports labeled USB and AUX POWER.
When connected to a USB host (Mac, Windows), enough power may be provided by the host. If the connected
host does not provide enough power, then AUX POWER is needed.
1 – USB Ports
USB transmits data, while AUX POWER only powers the unit.
AUX POWER is present only on the desktop version.
2 – POWER
Connect the provided power supply to power the unit
3 – CV/GATE
These are typically used to send or receive electrical signals with external devices such as a Eurorack modular
system. These connections can be used as CV, Gate or Sync signals.
The CV output sends and receives a control voltage you can use to control external oscillators, filters or other
voltage-controlled devices. A gate can send or receive a simple on-off message from external devices similar to
a note on-off message. Gate signals are typically used for triggering envelopes or advancing sequencer steps.
Sync sends or receives time-based signals from external devices.
4 – Audio IN
Connect an external mono audio source. The incoming audio can be processed through the internal sound
engine or simply passed through as a daisy chain with no processing.
5 – Phones
Connect your headphones to the UNO Synth Pro with a stereo mini-plug.
5
1 3 4 5 6
1 – Installation and Setup
7