Setup; Master Tuning; Midi - IK UNO Synth Pro User Manual

UNO Synth Pro
5.2 – Setup
The setup menu is where the global utility settings are selected. Machine settings includes MIDI and system
management.
5.2.1 – Master Tuning
In this first voice of the menu, you can select the Master Tuning between +/-50cents from the standard A at 440Hz.
5.2.2 – MIDI
UNO Synth Pro transmits the front panel knob and button movements via Control Change messages (CC), and
also receives CC messages for external control.
Each parameter or control on the synth has its own unique Control Change number, so you can completely
control the unit via external controllers or computers.
MIDI data can also be exchanged between the UNO Synth Pro and a computer using a USB cable.
CHANNEL IN: between 1 and 16
CHANNEL OUT: between 1 and 16
SOFT THRU: The MIDI Soft Thru functionality, when enabled, allows messages from the MIDI IN DIN of the unit,
to be copied to the MIDI OUT DIN.
INTERFACE: When the MIDI Interface Mode is enabled, the MIDI messages incoming from the USB are copied
to the MIDI OUT DIN of the unit, and the MIDI messages incoming from the MIDI IN DIN are copied to the USB.
PROGRAM CHANGE: Program Change messages allow the recall of a preset without touching the interface.
You can enable and disable the receive and transmit of Program Change messages.
26
5 – Global Controls