Bilisoft Fiberoptic Light Pad Assembly - GE BiliSoft Service Manual

Chapter 3: Components and User Controls
Component/Control

BiliSoft Fiberoptic Light Pad Assembly

The fiberoptic light pad comes in two sizes – large and small. The LED light source in the BiliSoft light box is
focused on the fiberoptic lenses at the end of the fiberoptic cable connector. The fiberoptic cable contains
plastic fibers that transmit light from the light box to the light pad. The light pad is constructed of these plastic
fibers woven into a mat. This patented process produces a light pad that emits light over its entire surface.
Average light intensity depends on the size of the light pad. See Specifications section for more details.
Component/Control
6
Function
7. Air Filter – For proper cooling it is important to keep
the air filter clear of obstruction. See the maintenance
section of this manual for more details.
8. Power Cord Receptacle
9. Fuse Cover - Houses two power inlet fuses
10. Mounting Bracket Holes – Four holes on the bottom
of the main unit are used to attach the optional
mounting bracket. The mounting bracket can be
positioned on the left or right side of the light box.
M1110150 006
1. Fiberoptic light pad
2. Fiberoptic cable connector
3. Fiberoptic lenses
4. Fiberoptic cable
© 2007 by General Electric Company. All rights reserved.