Mounting Ash Tray Guides; Mounting Knobs To Ash And Grease Trays - Pit Boss PBMEMUU001 Assembly And Operation Instructions Manual

23. MOUNTING ASH TRAY GUIDES

Parts Required :
2 x Charcoal Ash Tray Guides (#24)
2 x Gas Drip Tray Guides (#26)
1 x Main Gas and Charcoal Chamber
M6x10 mm Screws (#D)
8 x
Installation :
• Mount two Charcoal Ash Tray Guides to the bottom of the
Charcoal Chamber and mount two Gas Drip Tray Guides.
Use: 8 x M6x10 mm Screws
See Fig. 23.

24. MOUNTING KNOBS TO ASH AND GREASE TRAYS

Parts Required :
2 x Knobs (#29)
1 x Ash Tray (#25)
1 x Gas Grease Tray (#27)
2 x M5x10 mm Screws (#B)
Installation :
• Mount the Knob to the Ash Tray and mount the
Knob to the Gas Grease Tray.
Use: 2 x M5x10 mm Screws
See Fig. 24.
Note: Loosen the screws of Drip Tray Guides and Ash Tray
Guides for alignment and tighten it again if needed.
FIG. 23
D
24
D
26
FIG. 24
29
B
29
B
D
24
D
26
25
27
19