Getting Started - Mr. Coffee BVMC-HC Series Instruction Manual

GETTING STARTED

1. Unpack your coffeemaker and remove plastic bags, cartons and any
tape on the unit.
2. Position coffeemaker on a dry, stable, horizontal counter top.
IMPORTANT: KEEP PLASTIC BAGS AWAY FROM CHILDREN.
Clean Coffee Maker Before Use
Follow these simple steps:
1. Wash all of the removable parts in warm water with a mild liquid soap.
Dry thoroughly and reinsert into the coffeemaker.
2. Using the water pitcher, fill the water tank to the "MAX" marking with
clean, filtered water.
3. Plug your HotCup coffeemaker into a main supply socket and press
TM
the dry boil reset button.
If the dry boil reset button has been previously pressed, skip
NOTE:
this step.
4. Position your cup on the coffeemaker according to its height:
a. If using a small cup, keep the drip tray in place and position the
cup on the drip tray cover.
b. If using a tall cup, remove the drip tray and position the cup
underneath the brew basket.
5. Turn the knob to 12 oz.
6. Press the brew now button.
The coffeemaker will make a "pfff" sound when the coffee is
NOTE:
brewing, the water tank light will shut off, and the water level in the
water tank will go down.
7. Discard the water in the cup. Your new HotCup
to use!
7.
coffeemaker is ready
TM
HOW TO MAKE YOUR FIRST
POT OF COFFEE
1. Using the water pitcher, fill the water tank to the "MAX" marking with
clean, filtered water.
2. Plug your HotCup coffeemaker into a main supply socket.
TM
3. Slide the brew basket out.
4. Place a standard #2 cone filter into the cone basket located inside the
brew basket. Make sure to fold the paper filter seams to ensure it fits
properly inside the brew basket.
5. Using the coffee scoop pour the desired amount of coffee grounds
into the paper filter.
6. Insert the brew basket into the coffeemaker.
7. Position your cup on the coffeemaker according to its height:
a. If using a small cup, keep the drip tray in place and position the
cup on the drip tray cover.
b. If using a tall cup, remove the drip tray and position the cup
underneath the brew basket.
8. Turn the knob to select your desired brew size.
9. Press the brew now button.
The coffeemaker will make a "pfff" sound when the coffee is
NOTE:
brewing, the water tank light will shut off, and the water level in the
water tank will go down.
10. Enjoy!
The cancel button will only cancel the brewing process before
NOTE:
the coffeemaker begins dispensing coffee. After the coffeemaker
begins dispensing coffee, the brewing process cannot be cancelled.
Suggested Coffee Measurement Chart:
Brew Size Ground Coffee
6 oz. 1 scoop
8 oz. 1 1/3 scoops
10 oz. 1 2/3 scoops
12 oz. 2 scoops
Problem Possible Causes
Coffeemaker shut The water tank ran out of
off and won't brew. water during the brew cycle
causing the coffeemaker to
overheat.
Teaspoons
6 tsp.
8 tsp.
10 tsp.
12 tsp.
Solutions
Add water to the water tank
and the let the coffeemaker
cool down for 30 seconds.
Then, press the dry boil reset
button located at the back of
the unit (make sure the dry boil
reset button is fully inserted
back into the unit).
8.