Main Menu: Identification (Menu 5) - Siemens SITRANS F US Operating Instructions Manual

Ultrasonic flowmeter for use with sensor type sono 3100, sono 3300 and sonokit 1- and 2-tracks
Hide thumbs Also See for SITRANS F US:
Table of Contents

Advertisement

6.5

Main menu: Identification (menu 5)

Unit identity, menu 5.1
Device-specific or tag-specific data can be called or entered in this menu.
Tag number, menu 5.1.1
Tag description, menu item 5.1.2
Tag message, menu item 5.1.3
Tag-specific data can be entered in these menu items. The
control here. Numbers, letters and text characters are selected with the
If no text is stored, the end of text-character < flashes in the first segment when you enter these
menu items. By actuating the
to the right and one character can be selected from the character set. The following characters
are available:
The selected character is entered by actuating the
again. Another character can be selected with the
actuating the
The number of characters is limited to:
-
-
-
For texts longer than 16 characters the marks < and > in the first and last segment indicate that
there are further characters to the left and/or right of the displayed text section. These are
displayed by actuating the
Deleting texts: Select the end of text character from the character set with the
and then actuate the
Note
If the
the characters are automatically scrolled.
Manufacturer identity, menu 5.2
The serial number, MLFB order number and software version of the device can be read in the
individual menu items.
Nominal size, menu 5.2.5
The nominal pipe size is entered in this menu item. It is not possible to change the nominal size
without the factory code.
key when the end of text character flashes.
Tag number: 20 characters (8 characters in HART)
Tag description: 20 characters (16 characters in HART)
Tag message: 32 characters
key. All entries to the right of the end of text character are deleted.
and
keys are actuated continuously (finger continuously touching the glass panel),
SFIDK.PS.029.E5.02 / SW 2.01.07
and
keys, the end of text-character moves one position
Output
key and the end of text character flashes
and
keys.
and
keys functions as cursor
and
key. The text input is ended by
and
keys.
and
keys
41

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sitrans fus060 hart

Table of Contents