BMW Universal Bluetooth Manual page 9

The following steps are an example of the pairing procedure that must be initi-
ated to pair the Sony Ericsson T68i phone to the ULF Control Module.
1. Press the menu button.
2. Select "Connect".
3. Select option 3: "Bluetooth".
4. Select option 4: "Options".
5. Select option 1: "Operation mode" and set to "On" or "Automatic".
6. Go back one step by pressing the red phone button several times.
7. Select option 3: "Discover".
8. Mobile phone display shows 'Searching'
9. Select "BMW ......" in upcoming list.
10. Select option 1: "Add to paired".
11. Enter the password (= ULF passkey) located on ULF Control Module that
is in the rear of the vehicle or on the Passkey Reference Card.
• Mobile phone display shows 'BMW ...... Pairing'
• Mobile phone display shows 'Pairing Successful'
• Display screen shows 'Pairing succeeded' for 3 seconds
12. Enter device name or accept the name that is automatically displayed.
13. Mobile phone display shows "Added to paired devices".
14. Exit menu by pressing the red phone/NO button.
15. Once the phone is successfully paired to the device cycle the ignition switch off
and back on.
16. The devices should wirelessly connect within 30 seconds. The connection is
established when the phone displays the symbols indicated, on the right side of
the screen.
Note: Shortly after turning on the ignition and the
Bluetooth TM connection is identified, the phone may dis-
play a message asking if the connection should be estab-
lished/accepted. The connection authorization request
will always occur unless the setting on the phone is modi-
fied to allow automatic connection every time, please refer
to the user's manual of the phone to determine how to
change this setting.
9
Bluetooth TM