System Overview; Voice Recognition; Coding Ulf Control Module To Vehicle - BMW Universal Bluetooth Manual

6. Power Module
The power module in the ULF control module regulates the voltage supply and
monitors system shutdown in the event of an under voltage situation in the vehicle.

System Overview

Voice Recognition

The voice recognition for the this system is integrated into the ULF Control Module and
utilizes the same voice commands as those used with the TEMIC Voice Recognition
Module used with the CPT8000 phone system. The "Owner's Manual for the Voice
Input System" P/N 84 11 0 027 942 should be referenced for more detailed information
regarding voice command features.

Coding ULF Control Module to Vehicle

After installing the ULF Kit, the vehicle should be re-coded with DISPlus/GT1 SW 33 or
higher, using the "Retrofit" path to ensure that the system works properly with the sys-
tems currently installed in the vehicle. The recoding is done automatically when using
the following "retrofit" procedure:
Example for coding E46 with ULF installed:
• Connect DIS or GT1 to vehicle (with SW 33 or higher installed).
• Turn on ignition
16
Bluetooth TM