Table of Contents
Advertisement
CHAPTER 1 |
DEVICE PROGRAMMING UNIT USER'S MANUAL
PRINTER SETUP
<SETTINGS
<EXIT
•
Press SETTINGS to select the printer. Two printer
choices are available: PT-9200DX and PT-9500PC.
(The model number is located on either the bottom
or back of the printer.) To toggle the selection
between the two choices, press CHANGE.
SELECT PRINTER
PT-9200DX
<EXIT
•
If the PT-9500PC is selected, the MORE key will
appear on the SELECT PRINTER screen.
SELECT PRINTER
PT-9500PC
<EXIT
•
Press MORE to select text size for the PT-9500PC.
•
Press CHANGE on the select text size screen to
toggle the text size between small (font size 9 pts.),
medium (font size 12 pts.) and large (font size 18 pts.).
•
To set the number of labels to be printed when a
device is programmed, press SETUP from the Main
Menu, then PRINTER, then COPIES. The display will
show:
# OF COPIES=2
<EXIT
Use the INC # (increase number) or DEC # (de-
crease number) buttons to set the number of
copies between 0 and 9, then press EXIT three
times to return to the Main Menu.
When the number of copies is set to "0" , the label printer
is disabled.
BULK>
COPIES>
CHANGE>
MORE>
CHANGE>
INC #>
DEC #>
INTRODUCTION
7
Hide quick links:
Advertisement
Table of Contents
