Table of Contents
Advertisement
Transmit Menu
In Setup Mode, use YES or NO to scroll to the Transmit Menu, and press RETEST to enter. The
first option, PIN, displays.
PIN Number
Options:
7-digit number
Default:
No default. Each unit has a unique PIN
Access Level:
Password protected
The PIN number identifies your organization's mailbox where monitor vitals and configurations are
stored until retrieved by Honeywell HomMed. This PIN is provided by Honeywell HomMed. The
Genesis DM monitor sends data to this mailbox address and the LifeStream™ checks this same address
to retrieve the data.
You must make sure that this number is correct. Check the number against the one you received
during your inservice.
1.
In the Transmit Menu, scroll to the PIN Number option. If the number is correct, you can move to
your next task. However, if it is incorrect, press RETEST to enter the option. The first digit blinks.
2.
Use YES or NO to scroll to the correct number, and press RETEST to accept the value and
move to the next digit.
3.
Repeat steps 2 and 3 until you enter or correct the entire PIN number.
You can scroll to the next Transmit Menu option, press MANUAL to return to the Main menu, or
press START + YES to exit Setup Mode.
If you just need to correct one digit, use the RETEST key instead of the RETEST key. The
MANUAL key will enter the new digit and also back you out of the menu.
Dial Type
Options:
Tone or pulse (rotary)
Default:
Tone
Access Level:
General
If tone dialing is unavailable and there is a rotary phone, change the dial type to pulse.
P.4510EN.01
GENESIS DM CLINICIAN GUIDE
Programming the Genesis DM Monitor
12/5/2007
30
Advertisement
Table of Contents
