Table of Contents
Advertisement
GENESIS DM CLINICIAN GUIDE
Programming the Genesis DM Monitor
MANUAL button
The MANUAL button allows you to back out one level from wherever you are. It is handy when you
want to quickly back out of a menu without scrolling to an exit option. For example, if you enter a menu
option and then realize that you are in the wrong menu, you can press MANUAL to back out. Keep in
mind however, that pressing MANUAL just backs up one level.
So if you are in Report Time #1 setting a value (a value is blinking) and press MANUAL, the displayed
values are accepted and you back up or return to Report Time #1. If you press MANUAL a second
time, and you return to the Main menu.
Exiting menus and Setup Mode
Refer to the menu layout, you can see that the Main menu as well as every sub-menu has an Exit
option. The Exit option takes you out of the current menu and returns you to the Main menu. The
Exit Setup Menu in the Main menu takes you out of Setup Mode and returns the monitor to idle
mode.
To immediately exit Setup Mode at any time, press START + YES.
Scheduling frequency
You may schedule how often Genesis DM collects weight, questions, and optional device data.
Scheduling options include every time, one time per day, or not at all (off).
Once-a-day collection
If you choose one time per day, Genesis DM collects the scheduled data during the first monitoring
session initiated by a scheduled Report Time or by pressing RETEST. Once the scheduled data is
collected, the monitor will not collect it again until the next day. Genesis DM resets to a new day at
midnight.
If the monitor times out without a patient response (non-compliance), it will attempt to collect the
scheduled data the next monitoring session. Timing out or even powering down does not affect the
once-a-day schedule.
12/5/2007
19
P.4510EN.01
Advertisement
Table of Contents
