Advertisement
06
STEP 4
Connect both frame ends using the center rails
STEP 5
Install foot with pre-installed glides
STEP 6
Place desk frame onto tabletop
Ensure the gap is facing inward
and is closer to the top edge.
Insert center rails (5) to join frame ends (3,4) together. Do not insert
or tighten machine screws until Step 8.
Use Allen wrench to install foot (2) using 4 machine screws (11). Repeat for the second leg.
Extend the desk frame to align with the pre-drilled holes in the
tabletop. If you are using your own tabletop, allow the tabletop
to extend 1.5" beyond the side brackets.
Assembly
Advertisement
