GE Centricity SP1001 User Manual page 45

DIRECT ID
SET PLATE TYPE MODE
Enter cassette or press
SP1001
3 Insert the cassette containing the image plate into the cassette slot of the
Centricity™ SP1001 as shown below.
Make sure to insert the cassette with the hinge [1] at the top and the locking
mechanism [2] at the bottom.
1
4 Enter the initialization code in the ID Software.
Refer to the User manual of the ID Software.
While the Centricity™ SP1001 the initializes the cassette, the status indicator at the
top of the machine is red and flashing.
When the cassette has been initialized, the Centricity™ SP1001 returns the cassette
to the cassette slot and displays the operator main screen.
5 Remove the cassette from the cassette slot.
5011A EN 20020315
to cancel
2
BUSY
45