GE Centricity SP1001 User Manual page 29

3 Insert the cassette containing the image plate into the cassette slot of the
Centricity™ SP1001 as shown below.
Make sure to insert the cassette with the hinge [1] at the top and the locking
mechanism [2] at the bottom.
1
The Centricity™ SP1001 starts digitizing the image plate. You can enter the
identification data, refer to step 4.
While treating the image plate, the Centricity™ SP1001 will display the following
screen:
IDENTIFY AT ID STATION
or press
SP1001
The Centricity™ SP1001 converts the information of the latent image to digital data.
If the Centricity™ SP1001 displays an error message, refer to
'Advanced operation ('Key-operator
5011A EN 20020315
2
DIRECT ID
to use emergency data
BUSY
mode')'.
Chapter 3,
29