Akai ABTS-21H User Manual page 4

PLAYING MUSIC FROM USB DISK
• Turn the Power button to "ON", the RGB light turn on automatically.
• Insert USB flash disk into slot, the speaker will make a tone "Music Play Mode", and play the
stored music automatically.
• Under playing mode, long press Forward or Backward button to select songs you like, short
press to adjust the volume up and down.
• Press Play/Pause to play or pause.
Remark: Under Bluetooth playing mode, insert USB disk will disconnect the Bluetooth and switch
to play the USB disk. You can press the MODE button to switch to Bluetooth mode again.
FM RADIO:
•
Under FM radio state, the audio cable provided treat as antenna. Please Insert the audio cable
to get best FM signal before using.
•
Turn the power button to "ON", press the "MODE" button, the speaker will prompt "The
Radio Mode" when entering FM state.
•
Under playing mode, short press "Play/Pause" button to mute the speaker, long press
"Play/Pause" button to auto search the FM Channel and store it automatically.
•
Long-press Forward or Backward button to change the stored FM channel.
AUX-IN:
For other compatible music devices or your MP3/MP4 players, use the supplied audio line cable to
connect from the device's "Line Out" to the "Aux In" of this device to Enjoy playing music.
Under any playing mode. When you use the audio cable to connect the device, it will auto-switch
to the AUX mode.
Under AUX mode, all functions can be controlled by external device.
Remarks:
1. When an audio cable is connected to the device, you cannot switch to Bluetooth mode by
pressing the Mode button.
2. When an audio cable is connected to the device, you can press "TWS" button to make TWS
connection under AUX mode.
TWS FUNCTION:
1. Turn on two identical speakers you want to pair, both under BT mode. Only need to set up one
of the two units.
2. Press "TWS" button, speaker will make a tone "di" to start pairing, and make "di" voice for 3
times once successfully paired.
3. Make Bluetooth connection with your mobile phone to play music by the two paired Speakers
to create more powerful surround sound effect.
4. When you want to exit the TWS mode, press "TWS" button again to exit the TWS function.
EN-ENGLISH