Outdoor Unit Installation; Select Installation Location - CANVAC T-Series Installation Manual

OUTDOOR UNIT INSTALLATION

STEP 1: SELECT INSTALLATION LOCATION
Before installing the outdoor unit, you must choose an appro-
priate location. The following are standards that will help you
choose an appropriate location for the unit.
DO NOT INSTALL UNIT IN THE FOLLOWING
LOCATIONS:
Near an obstacle that will block air inlets and outlets
Near a public street, crowded areas, or where noise from
the unit will disturb others
Near animals or plants that will be harmed by hot air
discharge
Near any source of combustible gas
In a location that is exposed to large amounts of dust
In a location exposed to excessive amounts of salty air
PROPER INSTALLATION LOCATIONS MEET
THE FOLLOWING STANDARDS:
• Meets all spatial requirements shown in Installation Space
Requirements (Fig. 4.1)
• Good air circulation and ventilation
• Firm and solid—the location can support the unit and will
not vibrate
• Noise from the unit will not disturb others
• Protected from prolonged periods of direct sunlight or rain
60 cm (24in)
above
30cm (12in)
on left
200cm (79in)
in front
52
EN
30cm (12in)
from back wall
60cm (24in)
on right
fig 4.1