Safety Precautions - CANVAC T-Series Installation Manual

SAFETY PRECAUTIONS

READ SAFETY PRECAUTIONS BEFORE INSTALLATION
Incorrect installation due to ignoring instructions can cause serious damage or injury.
The seriousness of potential damage or injuries is classified as either a WARNING or CAUTION.
Warnings and their meaning:
WARNING: This symbol indicates that ignoring instructions may cause death or serious injury.
CAUTION: This symbol indicates that ignoring instructions may cause moderate injury
to your person, or damage to your appliance or other property.
This symbol indicates that you must never perform the action indicated.
WARNING!
Do not modify the length of the power supply cord or use an extension cord to power the unit.
Do not share the electrical outlet with other appliances. Improper or insufficient power supply can cause fire or electrical shock.
When connecting refrigerant piping, do not let substances or gases other than the specified refrigerant enter the unit. The pres
ence of other gases or substances will lower the unit's capacity, and can cause abnormally high pressure in the refrigeration
cycle. This can cause explosion and injury.
Do not allow children to play with the air conditioner. Children must be supervised around the unit at all times.
1. Installation must be performed by an authorized dealer or specialist. Defective installation can cause water leakage, electrical
shock, or fire.
2. Installation must be performed according to the installation instructions. Improper installation can cause water leakage, electri-
cal shock, or fire.
3. Contact an authorized service technician for repair or maintenance of this unit.
4. Only use the included accessories, parts, and specified parts for installation. Using non-standard parts can cause water leak-
age, electrical shock, fire, and can cause the unit to fail.
5. Install the unit in a firm location that can support the unit's weight. If the chosen location cannot support the unit's weight, or the
installation is not done properly, the unit may fall and cause serious injury and damage.
6. The appliance shall be stored in a room without continuously operating ignition sources (such as open flames, an operating gas
appliance or an operating electric heater)
7. Do not pierce or burn.
8. The appliance shall be stored in a well-ventilated area of the same size as the room area specified for operation.
9. Be aware that refrigerants may be odourless.
10. For all electrical work, follow all local and national wiring standards, regulations, and the Installation Manual. You must use an
independent circuit and single outlet to supply power. Do not connect other appliances to the same outlet. Insufficient electrical
capacity or defects in electrical work can cause electrical shock or fire.
11. For all electrical work, use the specified cables. Improper electrical connections can overheat and cause fires and electrical
shocks.
12. All wiring must be properly arranged to ensure the control board covering can close properly. If the control board cover is
not closed properly, it can lead to corrosion and cause the connection points on the terminal to heat up, catch fire, or cause
electrical shocks.
13. In certain functional environments, such as kitchens, server rooms, and similar, the use of specially designed air-conditioning
units is highly recommended.
37
EN