ADT On-The-Go Emergency Response System User Manual page 9

Setting up your system
STEP FOUR
Turning your mobile
device on or off
Ƽ
Press the on/off button on the
side of the mobile device and hold
for approximately 5 seconds or
simply place the mobile device in
the cradle charger, assuming the
cradle charger is plugged in.
Ƽ
All the lights will turn on and the
green light will start blinking. This
indicates the Mobile Device was
successfully turned on and you will
hear "system ready."
9
Ƽ
If you need to turn the device off,
again press the on/off button and
hold until the red battery light
illuminates, then all the lights will
turn off. This indicates your mobile
device was successfully turned off.
Important: Please note that when
the mobile device is turned off, you
will not be able to call for help. If
the mobile device is turned off, it
will automatically turn on again
when placed in the cradle charger.
Red battery
light
Green light
On/off
button on
the side