ADT On-The-Go Emergency Response System User Manual page 14

Fall detection pendant voice guidance
Event
Mobile device
receives a fall signal
Fall alarm
is canceled
20-Second window
for cancellation
14
Voice prompt
"Fall detected - press and
hold button to cancel."
"Alarm canceled."
"Fall detected -
contacting Emergency
Response center."
Notes
This will occur for about 20 seconds and will allow
you time to cancel the alarm. During this time,
you may press and hold the button on the fall
button for 5 seconds to cancel the signal.
Alarm has been canceled.
The signal will then be sent to the monitoring
center and an operator will call your mobile device
and/or the base station to assess your situation
and dispatch the appropriate help to you.