Station Settings - La Crosse Technology V50AU Setup Manual

BASICS

Station Settings

1. When the station is first powered on, it will begin searching for your outdoor
sensors, which should connect shortly.
2. To manually set your time, date, and other settings, hold the
enter the Settings Menu.
Settings Menu Order
Greeting • Language
Month • Date •
Celsius/Fahrenheit* •
Wind Speed Units (KMH or MPH)
Thank You
Use the +/- buttons on the
top of the station to adjust
the values.
* Rain data will be displayed in Inches when Fahrenheit is selected, and in Millimeters when Celsius is
selected within the Settings Menu.
** The default pressure reading is 1013 hPa (29.92 INHg). The station will acclimate on it's own if the
pressure number is not set. Learn more on page
Notes: Weekday will set automatically after year, month, & date settings are adjusted.
If you're connected to the Wi-Fi, the time and date will automatically update from the
Internet. See pages
• Beep On/Off
Calendar Order (Date/Month or Month/Date)
Pressure Units (hPa/InHg)
Press the
confirm selection and move
to next step.
3-4 for more information.
• 24/12 Hour Time
•
• Wind Direction (Letters or Degrees)
SET button to
16
SET
• Hour
•
Pressure Number
You may exit the Settings
Menu at any time by pressing
the LIGHT
button to
• Minute • Year
Setting** •
•
button.
06