La Crosse Technology V22-WRTHV2 Manual
  1. Manuals
  2. Brands
  3. La Crosse Technology Manuals
  4. Weather Station
  5. V22-WRTHV2
  6. Manual

La Crosse Technology V22-WRTHV2 Manual

Hide thumbs Also See for V22-WRTHV2:
Table of Contents

Advertisement

Quick Links

We are weather enthusiasts like you and know proper running equipment is important. These
FAQS provide valuable information on setup, positioning, and troubleshooting your station.
We recommend Adobe Reader version 10 or greater available at:
V22-WRTHV2 FAQS ........................................................................................................................................................... 1
Contents .............................................................................................................................................................................. 1
General Information ............................................................................................................................................................ 3
BATTERIES: What do I need to know about batteries? ................................................................................................... 3
HARDWARE: Sensors and Station..................................................................................................................................... 3
What are the power requirements for this station? ......................................................................................................... 3
POWER INPUT: Will this station work in other countries?? ............................................................................................. 3
SETUP: How do I setup my station? .................................................................................................................................. 4
MOUNTING: Where do I mount/position my sensors? .................................................................................................... 4
Where to I place my station? ............................................................................................................................................. 5
What is Distance | Resistance | Interference? .................................................................................................................. 5
READINGS: How do I interpret the current Wind Readings? .......................................................................................... 6
How do I interpret the Wind History Readings? ............................................................................................................... 6
How do I reset the Wind History Readings? .................................................................................................................... 7
How do I interpret the Rain Readings? ............................................................................................................................. 7
How do I reset the Rain Readings? ................................................................................................................................... 7
How do I view my HI and LO Temperature/Humidity Readings? ................................................................................... 8
How do I reset the Temperature/Humidity Readings? .................................................................................................... 8
What is Feels Like and Dew Point Temperature? ............................................................................................................ 8
Where does the HI | LO reading next to the Feels Like Temperature come from? ..................................................... 9
TIME: Does this station have Atomic Time? ..................................................................................................................... 9
How do I manually set the time? ....................................................................................................................................... 9
Why do "SEE APP TO CONNECT" or "LOST WIFI" show on my station? .................................................................... 10
BACKLIGHT: Does this station have a backlight? .......................................................................................................... 10
Can I operate My station on battery power only? .......................................................................................................... 10
BATTERY: What do the battery icons mean? ................................................................................................................. 11
WEEKDAY: How do I correct the day of the week? ...................................................................................................... 11

V22-WRTHV2 FAQS

CONTENTS

http://get.adobe.com/reader
1 |
P a g e

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the V22-WRTHV2 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for La Crosse Technology V22-WRTHV2

Summary of Contents for La Crosse Technology V22-WRTHV2

  • Page 1: Table Of Contents

    FAQS provide valuable information on setup, positioning, and troubleshooting your station. We recommend Adobe Reader version 10 or greater available at: http://get.adobe.com/reader CONTENTS V22-WRTHV2 FAQS ................................1 Contents ....................................1 General Information ................................3 BATTERIES: What do I need to know about batteries? ....................3 HARDWARE: Sensors and Station.............................
  • Page 2 Does this station have 12 hour and 24 hour time options? ................... 11 Why does the station show different color trees? ......................11 FORECAST ICONS: What do the forecast icons mean? ....................12 TROUBLESHOOTING ............................... 13 How do I change batteries in my sensors without losing data? ................... 13 BAR CODE: What are the barcodes and ID Numbers on my sensors and on my station? ........

  • Page 3: General Information

    LTV-R3: 2-AA batteries LTV-TH2: 2-AA batteries V22-WRTHV2: 5 volt power cord (required) and 3-AA batteries for optional backup of your time date. Battery operation only will not update sensor or Wi-Fi data. Power cord is required. POWER INPUT: WILL THIS STATION WORK IN OTHER COUNTRIES?? •...

  • Page 4: Setup: How Do I Setup My Station

    SETUP: HOW DO I SETUP MY STATION? Your station is a fully functional standalone station. 1. Install batteries into each sensor (any order). 2. Install power cord into wall outlet, and into the station. Install batteries into the station if you wish.

  • Page 5: Where To I Place My Station

    • The maximum wireless transmission range to the rain station is over 400 feet (121 meters) in open air, not including walls or floors. LTV-TH2: • Place your thermo-hygro sensor at least 6 feet off the ground. • For accurate temperature readings your sensor needs to be shaded from the sun in a well vented area.

  • Page 6: Readings: How Do I Interpret The Current Wind Readings

    Interference: • Consider electronics in the signal path between the sensors and your station. • Simple relocation of the sensors or the station may correct an interference issue. • Windows can reflect the radio signal. • Metal will absorb the RF (radio frequency) signal. •...

  • Page 7: How Do I Reset The Wind History Readings

    HOW DO I RESET THE WIND HISTORY READINGS? Your wind speed history readings are reset individually. 1. Press and release the WIND button to view the history reading you wish to reset. 2. Hold the MINUS button for 5 seconds to reset that value to current wind speed. 3.

  • Page 8: How Do I View My Hi And Lo Temperature/Humidity Readings

    HOW DO I VIEW MY HI AND LO TEMPERATURE/HUMIDITY READINGS? Your high and low temperature and humidity readings are recorded with time and date of occurrence. Each time a new high or low reading is recorded, that reading with time and date of occurrence will show.

  • Page 9: Where Does The Hi | Lo Reading Next To The Feels Like Temperature Come From

    WHERE DOES THE HI | LO READING NEXT TO THE FEELS LIKE TEMPERATURE COME FROM? Your station provides a daily HI | LO temperature reading, as well and the historical records with time and date stamp listed above. This is shown continually on your station. No button press is necessary.

  • Page 10: Why Do "See App To Connect" Or "Lost Wifi" Show On My Station

    3. Press and release the SET button to confirm and move to the hour. 12: and SET HOUR will show. Press and release the PLUS or MINUS button to adjust the hour. 4. Press and release the SET button to confirm and move to the minutes. :00 and MINUTES will show.

  • Page 11: Battery: What Do The Battery Icons Mean

    • When you operate as a connected station, the power cord is required to maintain Wi-Fi connection and sensor updates. BATTERY: WHAT DO THE BATTERY ICONS MEAN? • A battery icon will appear near your WIND reading when you need to change batteries your wind sensor.

  • Page 12: Forecast Icons: What Do The Forecast Icons Mean

    FORECAST ICONS: WHAT DO THE FORECAST ICONS MEAN? Standalone Station: When operating as a standalone station, the forecast icons predict weather condition over the next 12-hours based on the change of atmospheric pressure with about 70-75% accuracy. As weather conditions cannot be 100% correctly forecasted we are not responsible for any loss caused by an incorrect forecast.

  • Page 13: Troubleshooting

    Chance of Precipitation: Forecast for 12 hour period ⋅ HI | LO Temperature: Forecast of daytime maximum temperature and overnight minimum ⋅ temperature. Wind Direction: Forecasted sustained wind direction for the indicated hour ⋅ Data Stream items: Probability of Hail: Chance of Hail within 25 miles. ⋅...

  • Page 14: How Do I Delete Sensor Id Numbers

    HOW DO I DELETE SENSOR ID NUMBERS? In the rare event you need to replace your sensor, you will first need to delete the old sensor ID from your station. 1. Remove batteries from your old sensor. 2. Press and release the SENSOR button to view your sensor ID number. 3.

  • Page 15: Why Don't My Temperature/Humidity Readings On My Station Match The Weather Report

    great. If you do not regain connection, bring the sensor within 10 feet of the station and search again. WHY DON’T MY TEMPERATURE/HUMIDITY READINGS ON MY STATION MATCH THE WEATHER REPORT? • Your temperature and humidity readings are from you sensor at your location. Your local reporting station can be miles away so readings will differ.

  • Page 16: Why Am I Going Through Batteries Quickly

    • If sensor loses connection to the station for any reason, the station will show dashes after 30 minutes. • The station will search for 5 minutes every hour to reconnect with sensor. • Be sure you have good batteries. Manually search for your sensor by holding the SENSOR button for three seconds.

  • Page 17: Wind Reading 0.00: Why Do I Only See 0.00 For Wind Speed

    1. Loosen the screw on side of cups 2. Remove cups 3. Install new cups 4. Tighten screw Note: The screw in the wind cups will fit on the flat side of the metal stem on the sensor. WIND READING 0.00: WHY DO I ONLY SEE 0.00 FOR WIND SPEED? The 0.00 means your wind sensor is connected to your station.

  • Page 18: Wind Accuracy: Why Is My Wind Speed Inaccurate

    • Bring your wind sensor within 10 feet of your station and make sure it is connected to the station. • After 15 minutes move the wind sensor into the next room with a wall between the sensor and the station for 1 hour. •...

  • Page 19: Rain Low: Why Is My Rainfall Reading Low

    If a miss happens: • If your rain sensor loses connection to your station for any reason, the station will show dashes after 30 minutes. • The station will search for 5 minutes every hour to reconnect with rain sensor. •...

  • Page 20: How Can I Clean The Rain Sensor

    • Compare these tests. If they still read high then contact support. HOW CAN I CLEAN THE RAIN SENSOR? 1. Remove rain funnel (open locking tabs on both sides and pull off funnel) 2. Gently remove debris or insects inside the rain sensor. 3.

  • Page 21: What Are The Requirements To Connect

    • Not displayed: Not Connected • If it is not blinking, perform a Wi-Fi search by pressing & holding the + & - buttons together. Note: Station power cord use is required. Battery operation only, will not update sensor or Wi-Fi data to the station.

  • Page 22: Messages: What Is The Meaning Of These Messages On My Station

    11. New Data Stream Technology allows you to stream up to three items to your station. • Weather Service selectable forecasts: Wind, Snow, Thunderstorms, Hail, Sky Cover and more. • Personal Message: up to 20 characters for special events or reminders. •...
  • Page 23 ADD SENSOR: HOW CAN I ADD SENSOR TO MY LA CROSSE VIEW™ APP? Check for compatible sensor to purchase at www.lacrossetechnology.com/V22-WRTHV2 Note: The number of sensors you can add will be limited by the memory of your mobile device and the speed of your Wi-Fi network connection.
  • Page 24 1. If you must have a station that connects to Weather Underground, we do offer a few models that will transmit data to both systems (you'll want to check the specs or feature list to make sure). Being weather enthusiasts ourselves, we appreciate the impact Weather Underground has had on the weather community.

Table of Contents