Table of Contents
Advertisement
Table 40. Riser configurations: FH - 1 CPU
Card type
a
LOM riser
: 2x 25 Gb
LOM riser: 2x 10 Gb
(10GBASE-T/SFP+)
BOSS M.2 (SATA)
PERC9+ Mini
The LOM mezzanine riser contains the OCP network card.
a.
Table 41. Riser configurations: LP+LP - 2 CPU
Card type
a
LOM riser
: 2x 25 Gb
LOM riser: 2x 10 Gb
(10GBASE-T/SFP+)
BOSS M.2 (SATA)
10 Gb NIC (Broadcom/
Intel/Qlogic)
10 Gb NIC (Intel)
25 Gb NIC (Broadcom/
Mellanox/Qlogic)
100 Gb NIC (Mellanox)
PERC9+ Mini
The LOM mezzanine riser contains the OCP network card.
a.
System fan
The VxRail D Series with SATA/SSD backplane supports up to six standard fans. The cabled fans are mounted between the
drives bay and the system board. Each fan has a single wire harness that plugs into the fan connectors on the system board
(Fan 1 through Fan 6).
Features of the cooling fans:
● Cooling fans are labeled FAN 1 through FAN 6.
● Total of six cooling fans are populated for dual processor configurations.
● All cooling fans are cabled.
● Redundant cooling fan is supported with only one cooling fan failing at a time.
● All six cooling fans have the same part number.
● The cooling fan labels are printed on the fan caddy.
Table 42. Fan support matrix for the VxRail D Series
Front
PSU type
Storage
8 x 2.5- inch Redundant
PSU only
Slot priority Riser height Maximum number
1
NONE
1
NONE
2
FH
Integrated
LP
slot
Slot priority Riser height Maximum number
1
NONE
1
NONE
2
LP
3
LP
3
LP
3
LP
3
LP
Integrated
LP
slot
CPU count
Fan1
1
Required
2
Required
Card length
of cards supported
1
HL
1
HL
1
HL
1
HL
Card length
of cards supported
1
HL
1
HL
2
HL
1
HL
1
HL
1
HL
1
HL
1
HL
Fan2
Fan3
Required
Required
Required
Required
Card height
NONE
NONE
FH
LP
Card height
NONE
NONE
LP
LP
LP
LP
LP
LP
Fan4
Fan5
Required
Required
Required
Required
Replacing and adding hardware
Maximum
PCIe width
supported
x8
x8
x16
x8
Maximum
PCIe width
supported
x8
x8
x8
x8
x4
x8
x16
x8
Fan6
Not required
Required
33
Advertisement
Table of Contents
