Right Control Panel View - Dell D560 Owner's Manual

Table 11. System health and system ID indicator codes (continued)
System health and system ID indicator code
Blinking blue
Solid amber
Blinking amber

Right control panel view

Figure 6. Right control panel
Table 12. Right control panel
Item Indicator or button
1 Power button
2 USB port
3 iDRAC Direct LED
4 iDRAC Direct port (Micro-AB
USB)
Condition
Indicates that the system ID mode is active. Press the system
health and system ID button to switch to system health mode.
Indicates that the system is in fail-safe mode. If the problem
persists, see the
Indicates that the system is experiencing a fault. If the
problem persists, see the
Icon Description
Indicates if the system is powered on or off. Press the power
button to manually power on or off the system.
NOTE:
ACPI-compliant operating system.
The USB port is 4-pin, USB 2.0-compliant. This port enables
you to connect USB devices to the system.
N/A The iDRAC Direct LED indicator lights up to indicate that the
iDRAC Direct port is actively connected to a device.
The iDRAC Direct (Micro-AB USB) port enables you to access
the iDRAC Direct (Micro-AB) features.
Support section.
Support section.
Press the power button to gracefully shut down an
Dell EMC VxRail D Series overview 13