Table of Contents
Advertisement
The VxRail D Series Appliance is a 1U, dual socket rack system with 8 x 2.5-inch drives and supports:
● Up to two Intel ® Cascade Lake Xeon ® Scalable processors
● 16 DIMM slots
● M.2 based Boot Optimized Storage Solution module
● Two redundant power supply units (PSU)
● PCI Express generation 3 expansion cards
NOTE:
All instances of SAS/SATA hard drives/SSDs are referred to as drives in this document, unless specified otherwise.
Topics:
•
Front view of the system
•
Back view of the system
•
Inside the system
Front view of the system
The front view of the system displays the features available on the front of the system.
Figure 2. Front view of the system
Table 8. Features available on the front of the system
Item
Ports, panels, and
slots
1
Left control panel
2
VGA port
3
eSATA port
4
Drive slots
10
Dell EMC VxRail D Series overview
Dell EMC VxRail D Series overview
Icon
N/A
N/A
Description
Contains the system health and system ID and status LED
indicators.
Use the VGA port to connect a display to the system. For more
information about the supported VGA port, see the Technical
specifications section.
NOTE:
The rear VGA port overrides the front VGA port
when both the ports are connected.
The eSATA port is not supported on D Series appliances.
Enables you to install drives that are supported on your
system. For more information about drives, see the Technical
specifications section.
2
Advertisement
Table of Contents
