Advertisement
1. Charging Port
2. Water Tank Fill Port
3. Power Button
4. LED & Sound Effects Button
5. Fog Vent & LED Lights
USING & MAINTAINING YOUR FOG BLASTER
Before using the Fog Blaster, charge it by connecting the included Charge Cable to the Charging Port and
a USB outlet (fig 1.). The red light will be on while charging. When the light turns off, your Fog Blaster is fully
charged. Charge for up to 3 hours. Remove the USB plug from its outlet. Next, push and hold down the Water
Tank buttons while pouring water into the fill port (fig 2.). Release when filled. Do not overfill!
FOG BLASTER DIAGRAM
1
(fig. 1)
2
3
5
Hold down to open
the tank while pouring
water into the fill port
13
Please visit
www.hover-1.com/troubleshoot
(fig. 2)
to request missing
or defective parts
4
Advertisement
