Advertisement
4. Align the holes of the Bucket Seat with the holes of the Frame Base and Fog Blaster Mount. Use the Large Hex
Key to fasten four of the M8 Short Screws. Secure the Bucket Seat to the frame using the 2 wrenches with four
Anti-Slip M8 nuts and four nuts as shown below.
Tools
needed
x 4
B
5. Your Hover-1 Falcon-1 is now assembled!
A
x 4
9
Please visit
www.hover-1.com/troubleshoot
to request missing
or defective parts
Advertisement
