Advertisement
2. Locate the included Large Hex Key and M8 Long Screws then attach the Left and Right Handle Bars to the
Frame Base. Locate 4 of the Anti-Slip M8 Nuts and the Large Wrench. Tightly fasten the nuts onto the M8 Long
Screws as shown below.
3. Insert the Frame Extension into the Frame Base. Adjust the Frame Extension to your desired length. Secure in place
using the Twist Knob as shown below.
Tools
needed
A
B
x 2
x 2
7
Please visit
www.hover-1.com/troubleshoot
to request missing
or defective parts
Advertisement
